11.5

Tools and wizards 301
www.magix.com
Tune
Tunes the instrument.
Oscillator shape (osc shape)
The shaper adds additional frequency shares to the basic sound of the
oscillator by artificially reshaping the wave shape. A sine wave (shape = 0) can
be reshaped up to a square curve (shape = max).
Oscillator waveform
The fundamental waveform of the oscillators is selected here. You can choose
from sine/triangle/sawtooth/sample. If "Sample" is selected, you can use the
controller to select a sample, i.e. a previously recorded drum sound. These
samples are saved in the folder /Synth/robota/samples/. If you select custom
samples, they will appear in the selection list. If you are playing your own
samples, they will appear in the selection list.
Noise
Adjust the ratio between the oscillator sound and the noise generator.
Attack
Adjusts the attack time. The greater the set value, the softer the attack of the
sound. The attack rate is also applied to the lo-fi and filter envelope curves.
Decay
Adjusts the decay curve. The greater the value, the slower the instrument will
decay.
FM/Ring modulation frequency (Fm/rng frq)
The fundamental frequency of the frequency or ring modulation.
FM level (fm lvl)
At a low frequency FM first adds vibration to the sound, at high frequencies
and low levels it creates bell-like sounds, as the level increases metal sounds,
and finally noise.
Ring modulation level (rng lvl)
Ring modulation creates typical auxiliary frequencies.
FM/Ring modulation decay (Fm/rng dcy)
Time constant of FM/ring modulation by-product. Only the beginning of the
drum sound is affected by the modulation.
Rectify
Distorts the audio signal.