11.5

Mixer 163
www.magix.com
Left clicking on value displays, below the faders, or on the left button corners
decreases the values. If the key is kept depressed, the value is automatically
reduced until the key is released, or until the end of the scale has been
reached. ("Page down").
Right clicking on value displays, below faders, or on the right button corners
increases the values. If the key is kept depressed, the value is automatically
increased until the key is released, or until the end of the scale has been
reached. ("Page up").
Right clicking on buttons (e.g. compressor) opens the corresponding window
(“End”).
The level faders can be adjusted very precisely. Click on a fader, keep the
mouse button pressed, move the mouse pointer away from the fader to the left
or right. You can then adjust the settings by moving the mouse in a vertical
direction. The steps of the settings become smaller as the mouse button is
moved further away from the selected fader.
The step size of the fader movement also becomes smaller if you keep “Shift”
depressed while moving a fader.
There are two ways to change knob settings. After clicking on a knob you can
either move the mouse around the knob this is the standard method, or move
it up and down similar to moving the faders. You can reduce the step size of
the value settings by keeping the “Shift” key depressed.
Channel strips
Each track in the VIP is sent through a specific mixer channel, i.e. the sound
settings of the respective mixer channel are applied to the objects on the track.
Each channel strip provides the following setting options. Each individual
section can be opened and closed by clicking on the corresponding arrow
symbol.