11.5

110 Effects and effect plug-ins
www.magix.com
above-mentioned "out-of-tune" effect comes in: The pitch of the effect signal is
slightly modulated by gently "drifting" forward and backward in the delay curve.
The result is a floating effect where the speed is influenced by drifting
Chorus parameters
You can enter the following parameters to control the floating effect:
Speed: Modulation speed. Low speeds create an even, continuous
development. High speeds produce vibrato-like qualities, but can also result in
an "underwater" effect.
Depth: Modulation depth. This determines how strongly the speed affects the
pitch modulation.
Mix: This sets the balance between the direct signal and the effects signal.
Mode: You can choose between four operating modes of the chorus effect:
“Normal” is a combination of the direct signal and the detuned delay signal.
“Normal, low-pass” is designed for bass-heavy signals like bass guitar. The
bottom end of the signal stays clear and well-defined, the effect is only audible
for the mid and treble frequencies.
“Dual” makes the source sound more lively than a single "part". The sound is
spread over the stereo panorama, which makes this mode seem "wider". The
character of the sound becomes livelier than with a single voice only, and it is
also distributed over the stereo panorama, making the mode sound "broader".
“Quad, low-pass” is ideal for creating sounds such as deep synth pads with
tight bass frequencies.
Tip: Similar to the stomp boxes our vintage effects are modeled on, there is a
"footswitch" below the pedal’s logo that can be clicked to turn the effect on or
off for A/B comparisons. All the effects of the Vintage Effects Suite have been
designed like this.