Manualshelf

11.0

ManualsBrandsMagix Xara ManualsApplicationsSamplitude Producer
471472473474475476477478479480
Table Of Contents
480 General settings
www.magix.com
The hardware controller setup contains two tabs. The first one is
used for general settings while the second one is used for learning
functions.
1. Press the "Select controller" button. Then select your controller
or a compatible model from the list. With Delete or "Del" you can
remove selected controllers again. You can use the mouse to
change the order of the controllers and their internal assignment.
A controller that is indented corresponds to an expansion module.
You can use the check box above the controller or the "Activate
controller" button to temporarily deactivate a controller.
2. On the right you can select the MIDI parts that are connected to
your controller.
3. Your controller is ready for action after you have closed the dialog.
Track number
Specifies the number of tracks in a bank available to the controller.
These are usually 8 tracks. Mackie Control and HUI Protocol can only
access 8 channels per bank. However, there are also controllers that
have a native mode letting you learn several channels. Here you can
set this value to 16 or 24 (max. 64). The value is set to "1" for single-
track controllers.
Ignore SysEx input data
SysEx data sent by the controller is not processed by Samplitude 11
Producer.