11.0

Table Of Contents
MIDI menu 429
www.magix.com
Overdub
The MIDI data is recorded in the existing object; the new data is
mixed with the existing data. If a recording extends over several MIDI
objects, then these are combined into one.
Replace
Replaces the MIDI data of the existing object. If you record over
several objects, these are combined into a single new object.
Unlike when recording audio, existing MIDI objects on the recording
track are also played in "Playback while recording" mode. This way,
you can choose one of the recording modes even after the recording
was successfully ended.
MIDI panic – All notes off
This command sends a note off command to all MIDI devices which
are not deactivated in the MIDI options for all 128 notes on all 16
channels. Furthermore, sustain (Controller 64) is switched off and the
pitch wheel and modulation are set to 0. In addition, an all notes off
command is sent to all VSTi's used in the project.
If MIDI tracks or objects exist in the project, the same function is also
accessible by clicking the stop button in the transport console or
toolbar when the project is in "STOP" state.