11.0

Effects menu 375
www.magix.com
Reverb/Delay
The reverb effect device offers newly developed and very realistic
reverb algorithms to add more room depth to your recording.
Reverb
Reverb gives you a high-quality reverb which can be specified further
using the “Room Size”, “Time” and “Color” and mixed into the original
sound with “Mix”.
Room size: This controller controls a room simulator, which
calculates the reverb effect according to the room size. If the
controller is turned all the way to the left, then it sounds as if the
audio object was recorded in a very small room. If it is turned all the
way to the right, it sounds as if the audio object was recorded in a
cathedral.
Time: This is where you set the reverb tail's length, i.e. the sound's
"sustain" level.
Color: Control the sound of the reverb here, dampen or brighten it.
Mix: This controller determines how much of the unprocessed
original sound (dry signal) is subjected to reverb (wet signal).
Application of this effect in an AUX bus requires the controller to be
set to 100% (all the way to the right).
Delay
This effect is like an echo which delays the signal and repeats it.
Delay: This sets the period of time between the individual echoes.
The more the control is turned to the left, the faster the echoes will
follow each other.
Feedback: This adjusts the number of echoes. Turn the dial
completely to the left, there is no echo at all; turn it completely to the
right and there are seemingly endless repetitions.