11.0

236 Software / VST instruments
www.magix.com
application runs, starts, and stops synchronous to the time position
of Samplitude.
ReWire supports up to 4096 MIDI buses. A ReWire client only
registers the MIDI buses that are actually available with the host
(Samplitude 11 Producer). You can therefore select the bus within the
track in the MIDI channel menu (e.g. the receiving instrument for
Reason):
The "classic" MIDI channel of MIDI notes
and events is not important, it is
replaced by the ReWire MIDI bus
system. For each track a MIDI object is
able to control a ReWire MIDI BUS. This
means that all events of a MIDI object
apply to the track for this ReWire bus,
independent of the channel number the
events originally had. Multi-timbral MIDI
objects, like those created in the MIDI
file import, cannot be played correctly
with ReWire. You can, however, access
the ReWire client across multiple tracks
on various ReWire MIDI buses.
Only a few ReWire clients support direct opening of the client
application via the host application (Samplitude 11 Producer). In this
case, you will have to start the client application manually. You can
do this by starting your client application as you would normally. It
then automatically recognizes the host and starts in a special client
mode.