11.0

100 Effects and effect plug-ins
www.magix.com
Reset: Reset places the sound effect to the neutral starting position
where no processing power is used and where no effect is calculated
in the sound.
Load/Save: Stores the current adjustments as an effect file in order
to use them for other projects.
Stereo FX
With the Stereo FX Enhancer you can determine the positioning of
the audio material in the stereo balance. If the stereo recordings
sound unfocused and undifferentiated, an extension of the stereo
base-width can often provide better transparency.
Use the maximize function to move the echo, for example, into the
foreground, thereby improving the stereo picture.
Volume control: Adjusts the volume of every single channel, thereby
adjusting the entire balance. The reduction of left and right levels is
displayed under the control buttons. This way you can balance out
and thus improve an imbalanced recording in which, for example,
one channel was recorded at a lower level than the other.
Pan-Direction: With this controller you can move the sound source
that comes from the middle into stereo panorama. The signals at the
outer edges of the sound pictutere remain unchanged.
Bandwidth control: Adjusts the
bandwidth between mono (on the extreme left), unchanged
bandwidth ("normal stereo"), and maximum bandwidth ("wide", on
the extreme right). The individual sound sources of a recording are
squeezed together or pulled apart in the stereo picture.
Raising the bandwidth (values over 100) diminishes the mono
compatibility. This means that recordings edited this way sound
hollow when listened to in mono.