X

SAMPLITUDE QUICK START 87
Example: An error between beats 23 and 25 needs to be corrected. Playback starts
before the punch in position so that the introduction to the recording is made as easy as
possible. During the punch process the "Record" button flashes; the recording will start
automatically from the "In" marker (bar 23). Since the section following the object is already
satisfactory, the recording is ended automatically at the "Out" marker (bar 25).
Detailed information about different punch functions is provided in the "manual.pdf"
documentation, in the help file, and under "Play/rec -> Record mode/punch in -> Punch
marker mode (view page 581)".
Multi-track recording
The "Project options - mixer setup" dialog can be very useful for configuring multiple
tracks in multi-track recordings in a single step.
1. Open "Project options - mixer setup" via the key combination "Ctrl + Shift + M". You
can also access it via "Options -> Project properties -> Mixer setup...".
2. Click the "Routing" box and select the option "Route all tracks to existing stereo
devices" if you want to record in stereo. For mono recordings, select the option
"Route all tracks directly to existing mono devices".
3. If the recording doesn't start at the current track, enter the corresponding track
number into the "Start with track" field.
4. In the "Device setup (track in/output assignment, routing)" area, click the "I/O
devices" box and select "Record" from the dropdown list.
5. For example, if you have four recording devices, enter "4" into the "Track number"
field. The devices will then be set up across the next four tracks.
6. Click "OK" to confirm.