X

Table Of Contents
VIEW MENU 813
Grid Lines
This provides a choice between various line layouts for the grid display. The display of the
grid helps makes the positions in the arranger window more legible.
Units of Measurement
Specify the units of measurement for the grid view here.
The following units are available: samples, milliseconds, hours/mins/secs, SMPTE,
SMPTE/milliseconds, CD-MSF, feet and frames 16 mm (40 fpf) and feet and frames 35 mm
(16 fpf), noise reduction (meter).
The units of measurement selection will affect the start and length of the current range in
the project window, the grid width and the details of the position of the play cursor (position
line).
Snap Active
This functions turns the grid on or off.
Shortcut: Ctrl + #
Grid
Here you can set the grid type. To choose from:
Object grid
Grid range
Beat grid
Beat grid (relative)
Frame grid
Detailed information on snap and grid settings can be found under "File -> Project
Properties -> Snap and Grid Setup (view page 467)...".
Snap and Grid Setup
Detailed information on snap and grid settings can be found under "File -> Project
Properties -> Snap and Grid Setup (view page 467)".
Show 2nd Grid Line
This command displays a second grid.
Exchange Grids
This command exchanges the upper and lower grids.