Manualshelf

X

ManualsBrandsMagix Xara ManualsApplicationsSamplitude Pro
771772773774775776777778779780
Table Of Contents
EFFECTS MENU 775
Waveform Generator
This dialog contains a powerful generator for test tones.
Select RAM or HD as the type in mono or stereo at a resolution of 16-bit or 32-bit float.
The following sample rates are available: 22050, 32000, 44100, 48000, 88200, 96000,
176400, 192000, and 384000.
As a waveform, you choose between rectangle, triangle, sine, sawtooth (upwards),
sawtooth (downwards), white noise, pink noise, and brownian noise.
You can specify the length in samples, milliseconds, or SMPTE code.
The frequency (Hz) and volume (dB) are the final two waveform parameters at your
disposal. The signal created may then be used as a wave project/virtual project.
SMPTE Generator
If you don't have an external MTC to SMPTE converter for synchronization with analog
equipment, this dialog allows you to create audio files containing SMPTE audio signals.
Place the generated SMPTE signal onto an empty track and route the output to the
SMPTE synch input of the analog recording device.
You can choose from the following specifications as SMPTE frames per second: 24, 25,
29.97, 29.97 drop frame, 30, 30 drop frame.
The SMPTE start value may be entered in hours, minutes, seconds, and frames.
Specify the length in samples, milliseconds, or SMPTE code.
You can choose from the following sample rates: 44.1 kHz, 48 kHz, and 96 kHz.