X

EFFECTS MENU 621
Frequency/Filters
Parametric EQ
This dialog features a parametric 4-band equalizer.
The parametric equalizer allows you to activate filters for four freely selectable frequency
bands to adapt the sound of a sample/object more individually. Broadband elevations in
high and bass values as well as narrowband corrections to the frequency response can be
carried out here.
Volume: Use this controller to adjust the master volume by up to +/-20 dB should the level
rise or sink too much while filtering.
Gain: These controllers allow you to raise or lower the filter +/- 20dB. Setting the controller
to 0 deactivates the filter and thereby uses no CPU power.
Freq. (Frequency): The frequency controllers set the cut-off frequency of the individual
filters between 10 Hz and 24 kHz. You can freely choose the frequency enables multiple
filters to be set to the same frequency giving a greater effect.
Q (bandwidth): Set the bandwidth of the individual filters between 0.10 (very wide
bandwidth) and 10 (extremely narrow bandwidth).
Note: Depending on the parameter you select (gain, frequency, or Q factor), the fader to
the left of the input fields controls the corresponding parameters. Gain and frequency
values can also be changed directly in the display by dragging with the mouse.
Type: Set the filter type here. Filters types available include Peak, Shelving, High pass (=
low cut), and Low pass (= high cut).