X

EFFECTS MENU 605
Uniform normalization: The maximum level is detected from all objects and each object is
normalized according to that value. This is active by default.
Quick Access
Set parameters: Use this button to make the settings of the normalization function
accessible via quick access.
Get parameters: Use this button to get the current quick access parameters in the dialog.
Normalize (Quick Access)
This function enables the specified settings in the "Normalize" dialog under "Quick access -
> Set parameters" to be used immediately.
Shortcut: N
Loudness Adaption
This command executes an automatic RMS normalization. The loudness of each individual
title is analyzed and the level of the titles is adapted to create uniform volume sensitivity.
The preset target value is -15 dBfs. The target value may also be adjusted individually. The
closer the value is to 0 dBfs, the louder the signal will be.
This adjustment determines the percentage of control between the titles and the target
volume value.
Fade In/Out…
Use this function to show or hide selected ranges of samples in a wave project. The
amplitude will change according to the progression from the start value at the beginning of
the range to the end value and the end of the range.
A simple fade-in process may be activated in the dialog via the parameters "Fade start in %
= 0", "Fade end in % = 100". A simple fade-out may be executed by setting "Fade start in
% = 100", "Fade end in % = 0".
You can have the transition display in three different curve envelopes: exponential, linear, or
logarithmic.
Note that in virtual projects, powerful real-time fade and crossfade options are available
that usually make the use of destructive fade routines unnecessary.