X

580 PLAYBACK MENU
Scrubbing speed: This specifies the factor of the original speed applies to the scrubbing
speed. The range of values stretches from 0.01 to 10.0, i.e. 1/100 of the original speed up
to ten times the regular speed.
Scrubbing only on active track (1 track): If this check box is active, Samplitude will only
scrub the active track.
Global play device: Specifies the sound card driver for playback.
Record
If you select this menu point, recording is started immediately for the live, active track. You
can record both the audio as well as the MIDI into each active track here.
Detailed information on recording can be found in the chapter "Samplitude Quickstart ->
Workshop: recording (view page 80)".
Sh
ortcut: R
Record Mode/Punch In
Standard Mode (Playback while Recording)
This option corresponds to the option in the recording options with the same name. This
mode allows tracks to be recorded in addition to existing audio tracks while playback is
running.
Switch on the new recording tracks and activate monitoring.
These tracks are now active in "Input" mode, i.e. the input sound desired for recording will
be audible for these tracks. Recording begins at the play cursor position.
If you have selected a range behind the play cursor on the grid and marker bar and have
activated "Loop" mode, then recording will only begin at the loop start. Click the recording
button at the play cursor position and the track will signal that it is ready to record (the
recording button will blink during playback). Recording will only be activated once the start
of the range is reached, and the selected range will be recorded in "Loop" mode.