X

PLAYBACK MENU 577
Once play is activated, playback will begin from the next CD track marker and end at the
next one after that, which in turn is the starting put for the next playback range.
Note: For smooth Cue mode use deactivate the Loop mode.
In cue mode, the recording mode in the transport control changes to Record without
playback (band control) (view page 581). The original sound track is highlighted with a
special background color.
If recording is done in
cue mode, automatic scrolling in the arranger window will remain
switched off.
The play cursor may be repositioned at any time within the currently played original sound.
"System options -> Playback (view page 477)" may be accessed to ensure that the first
track
in cue mode is switched to"Solo". Pre-roll (ms) may be used to specify in
milliseconds how long the delay between execution of the record command and the actual
start of the recording should be.
Scrubbing Active
 Scrubbing Active Keyboard shortcut: "Alt + Shift + Page down"
 Jog (Absolute)
 Two Speed
 Shuttle (Relative)
 Scrub Left Keyboard shortcut: "Alt + Shift + Arrow left"
 Scrub Right Keyboard shortcut: "Alt + Shift + Arrow right"
Detailed information about scrubbing is provided in "Playback -> Playback options ->
Scrubbing (view page 579)"
Playback at speed 1 - 4: Select from four different playback speeds. Playback begins
immediately after the corresponding object is clicked.
 Play with Speed 1: Playback begins at the cursor position at 1/4 of the original speed.
 Play with Speed 2: Playback begins at the cursor position at half speed.
 Play with Speed 3: Playback begins at the cursor position at original speed.
 Play with Speed 4: Playback begins at the cursor position at double speed.