X

OBJECT MENU 553
When quantizing the object is hard quantized, i. e. it will be shifted to the next snap point.
If you are not satisfied with the results, you can "Reset Audio Object Quantization" settings,
which will set the objects back to their original position
Soft AQ
"Soft AQ" executes soft quantization according to the "Soft Q" parameter settings.
Remove Object Gaps
After object quantization has been applied, gaps between the objects can occur, which
may lead to audible dropouts in overhead signals. The command "Remove gaps between
objects" provides options for closing these gaps. The function "Use next object slice
audio material" may be used to move the object start position of the object to the right of
the gap to the left until the gap is closed, or the gaps between the objects may be filled by
Time Stretching the objects next to the gaps. Each method can be selected in the audio
quantization wizard. The overlap (crossfade) length setting of the first option, i.e. "Apply
next audio object slice's audio material", is applied.
Undo/Redo/Reset Quantization
Use the round arrow buttons to undo/redo the last quantization applied. In this case, the
counter-clockwise round arrow serves as the "Undo quantization" function, while the
clockwise arrow serves as the "Redo quantization" function.
Reset quantization: This function resets all quantization processes of the object positions.
Reset Audio Object Quantization
The "Reset object quantization" resets the selected objects to the original position and also
undoes the quantization.
Quantize Settings - Preset
Different presets are available for selection:
 5-tuplet: Quantization occurs in fifths
 Magnetic quantize: The "window" value is set to "50", i.e. only 50% of quantization will
be included. Only those events will be quantized that are located within a range of 25%
of the snap range to the left and right of the grid point.
 Soft quantize: The "Level" parameter is set to "50", i.e. quantization occurs at a half
interval between the current position and the next grid point.
 Swing: The swing parameter is set to "75", i.e. in contrast to the binary rhythm, which
features a "swing" value of "50", uneven/un-highlighted counting times will be set to
delay. This highlights the "swing" feeling.
 Triplets: Quantization occurs in triplets
 16th offbeat: The quantization grid's timing is moved back a 16th note
 8th offbeat: The quantization grid's timing is moved back a 8th note
 "New groove" and "More life for hi-hat" provide groove templates
Of course, you can also set your own values and save them as a preset.