X

TRACK MENU 539
Track/Dev+: Sets the recording device for this tracks to the next, e.g. if inputs 1 + 2 of the
sound card are set, it will be switched to 3 + 4. The button with the "+" sign to the right
sets the recording and playback devices to the next ones simultaneously.
Playback: Select your sound card device to record this track. You can also select a bus
track.
All Tracks: Applies the same record device chosen for this track to all tracks.
Track/Dev+: Sets the playback device to the next, e.g. if set earlier to outputs 1 + 2 of
your sound card, this will be switched to 3 + 4. The button with the "+" sign to the right
sets the recording and playback devices to the next ones simultaneously.
Track Type: This indicates if the track is a aux/submix bus. One track may also be both.
"Economy (view page 28)" as well as "2-channel Surround" modes may also be activated
for this track.
Timeshift/Delay: Use this fie
ld to set an offset for an entire track. Positive values cause the
playback from this track and the play cursor display to be delayed by the amount entered.
Negative values cause playback to occur earlier. All other tracks and the play cursor will be
delayed in relation to the entered value. To the right of the input field, you can select the
unit for the time delay.
Colour: Select a color for the corresponding track and its objects.
Effects/Routing: This button opens the effects routing dialog for the corresponding track.
Track Name: Use this field to change the name of the current track.
Recording
The section "recording" contains settings for recording from audio and MIDI.
File: Indicate the name of the file to be recorded here.
Assign file name automatically
C
lick "All tracks" on the right of the file name box and then select the desired command
from the popup that opens:
 File name_track number: Transfers the file name of the track to all other tracks and adds
the corresponding track numbers to them, for example, funky_01.wav, funky_02.wav,
etc.
 Project name_track number: Transfers the project name to all tracks and adds the
corresponding track number to them, for example, demo_01.wav, demo_02.wav.
 Track name: Sets the track name of each track as file names for the audio recording, for
example, Drums.wav, Bass.wav, etc.
 Track number_track name: Sets the track number and the track name of each track as
file names for the audio recording, for example, 01_Drums.wav, 02_Bass.wav, etc.