Manualshelf

X

ManualsBrandsMagix Xara ManualsApplicationsSamplitude Pro
531532533534535536537538539540
Table Of Contents
TRACK MENU 535
Detailed information about freezing plug-ins is provided in "Software instruments/VST plug-
ins -> Freezing plug-ins (Freeze)".
Track Freeze for AUX Buses/Submix Buses
Submix and Aux bus tracks may also be frozen. This way, you can get a complete group of
tracks to release the required CPU load including all effects, fades, crossfades, and
automation settings in one step.
Submix Bus
Tracks routed onto the submix bus are not changed. They remain the same.
The submix bus input is muted
The file created while freezing is inserted into the submix track as an audio object.
Changes made to the tracks after freezing which are routed to the submix bus have no
effect on the playback of the frozen submix bus.
AUX Bus
AUX send settings in tracks are taken into account when freezing
Tracks routed onto the frozen AUX bus are not changed but remain unchanged instead
The AUX bus input is muted
The AUX send fader of the affected tracks is colored blue.
An asterisk is added in front of the name of the AUX send fader in the mixer.
The file created while freezing is inserted into the AUX track as an audio object
After freezing, any changes made to the tracks that transmit to the AUX bus are not
updated in the file that was created during the freezing process.
Edit Track Freeze
This command opens the temporary trackbouncing VIP in which the frozen track is saved.
You can make any changes you like here (just like in any other project), from object cuts via
effect calculations in the track and object to adding other wave projects.
Frozen Submix/AUX Bus
If you have changed something on tracks that route to a frozen submix bus, you should
"unfreeze" the bus using the "Track unfreeze" command and then refreeze it immediately
afterwards with "Track freeze" in order to keep it up-to-date.
Unfreeze Track
This menu item removes the wave file created during "Track freeze" and brings back the
track that was saved in the temporary trackbouncing VIP.
Changes made in the temporary freeze project are also applied to the track.
Note: If you add additional tracks which were created when freezing a track to the project,
"Track unfreeze" will no longer be usable.