X

510 EDIT MENU
Left / Right mode
Use this function to switch to the Left / Right mode. The right mouse button then controls
object functions, the left one controls manipulations of the range.
Left mouse button:
Double click on volume and panorama automation curves: Creates a new curve event;
another double click on the same curve event deletes the event.
Right mouse button:
Click: Selects objects.
Click + Shift: Select multiple objects.
Drag objects: Moves objects
Drag + Shift: Moves objects onto a different track; the horizontal position remains the
same.
Drag + Ctrl: Duplicate one or more selected objects.
Drag + Shift + Ctrl: Duplicates one or more selected objects on a track; the horizontal
position is maintained.
Click on a point: Selects a point.
Click on an point + Shift: Allows selection of multiple points.
Drag selected points: Moves several events.
Wave (HDP/RAP) Mouse Mode
Range
Use the left mouse button to set the play cursor and select ranges.
Draw Wave
Draw the sample material at a high zoom level, which can be helpful if you want to remove
clicks and clipping.
Volume Draw Mode
In this mode, you can directly manipulate the volume using the mouse.
Scrub Mode
This mouse mode enables you to preview and control the playback speed. The project is
played forwards or backwards, depending on the scrub direction.
Zoom Mode
Click with the left mouse button to zoom into the wave display; zoom out with the right
mouse button.
Cut mode
Left click: Click on an object to separate it at the corresponding position.