X

FILE MENU 469
Keep Current Number (Tracks, AUX and Submix Buses)
Check this box to prevent the current settings from being overwritten when loading a mixer
preset. The current status of this checkbox is also saved along with a preset. If you quickly
want to add a few tracks, (e.g. 4 AUX buses and 4 submix buses), you only have to load
the "4 Busses 4 AUXes" preset.
When loading a preset, the respective tracks and buses will be added where the box is not
checked. In other words, place a check for settings that shouldn't be included in the preset
before saving.
Device Setup (Track Assignment, Routing)
Select the in and output device assignment for several tracks simultaneously in this area.
I/O Devices: Define the routing for playback, recording, or both.
Track number (0 for all): Start with track 0 as active track: This option permits a change
to I/O routing for a certain number of tracks. If you set the track number to 4, starting at
track 8, the selected routing setup is applied to tracks 8 - 11.
Note: To be able to switch these commands to active, you must first replace the "Do not
change the setup currently used in the project" option in the neighboring "Routing" field
with another option from the selection menu.
Routing
Keep current setup: No routing assignment takes place if a preset is loaded.
Route all tracks to stereo master: All tracks (incl. AUX and submix buses) are routed to
the master. L/R panning sets the panorama settings for the tracks to alternate between
left and right. Use this option if stereo sources are recorded as mono pairs.
Assign all tracks to different mono/stereo devices: All tracks are assigned to the
different output devices. In the system options window (shortcut: "Y") you can define which
devices are available in Samplitude and which are not. When routing to mono devices, the
tracks are also placed right/left in panorama alternatively.
Initialize tracks on Surround channels: The corresponding tracks are created here after
the Surround setup has been selected .
Use saved setup in preset: The settings saved in the preset are used.
External effects
Detailed information on this topic can be found in "Effects -> Breakdown and functionality -
> External hardware effect integration".