X

WHAT’S NEW IN VERSION 11.1? 45
Vandal
(Vandal in Samplitude Pro X Suite/Vandal SE in Samplitude Pro X)
 New presets and floor effects (view page 750)
Visit http://www.vandalamps.com for more information.
Version limits of Vandal SE versus Vandal:
1. The SE version of Vandal only includes the following stomp boxes (floor effects):
 La Crema Overdrive
 Hellfire Distortion
 Chorus
 PhaseShifter/tremolo
2.MIDI scenes & MIDI control are not included.
3.Guitar and bass amp, detailed microphone settings, and pre and power amps cannot be
selected manually, rather only via "Presets & templates".
4. The SE version does not feature "Scene memory"; in this case, a preset only includes
one individual scene. If a preset was created using the full version, then only the first scene
will be used.
MIDI
 Updated presets for "Create MIDI object": MIDI drums and MIDI phrases (filter sweep, 6
octave sequence, etc.)
 New MIDI tracks now assume the set volume fader mode (view page 161)
 Groo
ve template selection is now in the drum editor and drum map editor as well
 <ALL> may now be selected as the MIDI input device (view page 88) for a track
 Improved SMF MIDI file import (view page 242)/export (view page 456)
System options > Design > View options > VIP
The system options also allow you to set the following parameters via "Design > View
options > VIP (view page 491)":
 CPU peak meter: If this option is activated, the peak meter in the track header
displays the CPU load per track. The upper peak meter displays the load on the
Economy Engine for the left channel, while the peak meter below this displays the load
on the Low Latency Engine for the right channel. In this case, a display value of 0dB
equals a load of 100%.
 Compressed wave display: This display option causes the waveform to be distorted
according to the zoom level. The transition from silence (less than –90 dB) to signals with
lower levels (e.g. noise) is also shown more clearly.