X

372 HARDWARE CONTROLLER
1. Delete all previous entries. Click on the entry in the list and then press "Delete scale
entry".
2. Enter the value "6" into the "Scale entries on controller" and move the fader all the way
up (to the scale value +6 dB). Next, click "Set scale entry" to set the new entry.
3. Move the fader all the way down and enter the value "-100" into the "Scale entries on
controller". Click "Set scale entry" again.
4. Insert additional scale positions (e.g. -10,-20, -40, etc.) in the same way.
To test if the scale matches, close the dialog with okay and compare the controller's fader
positions with fader positions in the program mixer. Additional scale values may also be
added later. To change a value, delete the previously learned value first.
Learn controller for plug-in/mixer elements
The respective active mode may be adjusted for individual settings. The mixer's system
menu features the entry "Learn hardware controller" for this. Right click the icon in the
title bar in the mixer to open this function.
Click the command "Learn hardware controller", activate a mixer element with the
mouse, and then move the desired control element on the controller. The control element
will now control the assigned mixer element. This assignment only changes the mode
active at this time. This makes is possible to use controller elements that have been learned
in the hardware controller dialog.