Manualshelf

X

ManualsBrandsMagix Xara ManualsApplicationsSamplitude Pro
31323334353637383940
Table Of Contents
SYSTEM SETTINGS 35
Group object according to Multirecord: Objects that belong together will be grouped in a
multitrack recording.
Offline audio editing (only for Wave projects): Detailed information about destructive
editing is available in the chapter"Working in the project window -> Samplitude as a
wave editor (view page 108)".
Au
to Crossfade Mode: Use this function to activate a mode which adds a crossfade to
all newly recorded objects created from cuts or from wave projects which were dragged
into your project. Every object may be assigned a standard fade-in, and this can be
edited via the "Object editor fade" menu via "Get/set global crossfade". If two objects
overlap in this mode, a realtime crossfade will occur at the intersection.
CD arrange mode: If this is activated, Samplitude arranges newly added objects to insert
a Red Book Standard-compatible pause between the objects.
Project options - Bar/BPM
Bar/BPM/PPQ: Enter the bar type (counter/signature), the tempo in beats per minute
(BPM), and the timer resolution in peaks per quarter (PPQ/clicks per quarter note) here.
Get BPM from selected range: If you enter the number of beats into the field beside
"Selected range has beats:", then Samplitude will calculate the BPM based on the
selected range when the button is pressed.
Project options – Snap/Grid
Snap to: Switches the global snap on/off.
Objects: This option activates the object grid. This lets objects snap exactly to the edges
of other objects.
Range: Activates the range grid and enables the current range to be used as the basis
for snapping.
Beats/bars: Activates a grid with bars as the basis for snapping.
Bar grid (relative): Activates a grid with bars as the basis for snapping. The selected
object will maintain a relative distance to the snap markings when moved.
Grid/frames: Activates the frame-based grid.
Snap offset to project start: Sets the snap offset relative to the beginning of the project.
"Use current position for offset" specifies the current position as the grid's zero position.
Show grid: If a check is placed here, then the grid will be displayed for the project
according to the unit set in the selection box beside it.
Use snap offset also for grid: The snap offset is used as a reference size for the grid.
Project options - Standard pitch for tuner (Hz)
This field indicates a standard pitch of A at 440 Hz. You can change this value anytime you
like.