X

316 SOFTWARE-INSTRUMENTE/VST-PLUG-INS/REWIRE
Choose this option to automatically create new tracks for all VSTi audio outputs. The newly
created tracks are named accordingly. The mono/stereo configuration is assumed from
Samplitude (default).
Note: Individual outputs may also be routed to separate tracks. To display hidden tracks in
the arranger window again, use the track manager.
Advanced options:
Stereo/mono (standard): Information delivered from the plug-in is used for routing.
All as mono: This option forces individual outputs to be treated as mono outputs.
All as stereo: This option forces individual outputs to be treated as stereo outputs.
Audio/MIDI combined (tracks also send MIDI): Activate this check box to automatically
route the MIDI output for each individual track to this instrument.
Don't show the audio return tracks in the arranger: All newly created output tracks for
this instrument are hidden in the arranger but still appear in the mixer window. This setting
should be used if an instrument's individual outputs are controlled by a single MIDI file, and
therefore do not contain objects or information in the arranger window.
Note: A virtual synthesizer's audio output may normally be created, edited, and mixed in
the same track as the MIDI data the instrument is receiving. In some cases, this results in
duplicate use of the volume fader which, on the one hand, controls velocity or MIDI volume
(CC7), and on the other, this controls the audio level. These are not identical parameters.
For instance, you may include a MIDI instrument played with high velocity quietly in the mix
and vice versa. Therefore, the volume fader may be assigned differently. To do this, right
click the track's volume fader.