X

MIDI EDITORS 257
Gain (-128 – +128): The gain controller sets the amplification factor for events after they
have been processed by other parameters
Auto: If this option is activated, the gain parameter will be adjusted automatically to reach a
consistently full overdrive (Velocity 127).
Limit maximum and Limit minimum are used to limit the top and bottom velocity ranges
by entering a minimal or maximum velocity value.
Offline mode
Offline mode makes the Set value button available. If this is pressed, then the selected
MIDI events may be set to the velocity value entered in the field next to it.
Change velocity with the random function
With
the Random Variation button you can assign several of the same velocity values to
subsequently fluctuate around mean velocity values, e.g. in order to make a programmed
sequence sound as if it were played live. In the field next to the button, enter the maximum
deviation value allowed. The velocity values will be altered randomly within the range
specified.
If randomized variation should be displayed in relative %, then this option must be
checked accordingly. If the Randomize button is clicked now, the selected MIDI velocity
values will change accordingly. At a lower dynamic in the original material, variation will be
softer than positions with higher dynamics.
Only for notes in limit zone: A check placed here modifies notes with a velocity within the
limit minimum and limit maximum. This enables all notes with a velocity of 100 to be set to
77 or only notes above velocity 100 to work with random variation.
Note: By setting the limit minimum and limit maximum to the same value, a fixed value
may be set for the velocity for real-time use.