X

236 SURROUND SOUND
Pan setup
The "Pan setup" window allows you to make further changes to the Surround panorama
module. Open this window by clicking "Pan setup" in the Surround panorama module or by
right clicking the sound source.
Sound field offset (dB): The set offset is included for sound sources that are directly
positioned and routed to a single Surround channel/speaker. For example, signals traveling
from directly routed positions to panning between individual channels may be
compensated if they are too strong.
Sound field characteristic (only available in the Surround panorama module in "Sound
field" or "Angle" mode): This parameter is described in the section covering "Sound field"
and "Angle" modes.
Maximum sum output level constant (pan setup): If this function is selected, the
maximum level of all channel outputs of the Surround panorama will not exceed the set
value. This function is especially useful in case of automation and if sources are intended to
move throughout the room. Unintentional fluctuations of the max level may therefore be
compensated as positions change.
Link all tracks: Changes in the following settings within the Surround panorama module
are always transferred to all tracks of the VIP: sound field offset, level drop characteristics,
output volume sum constant, center, pan-law/width, LFE level and settings, channel
settings such as level changes or mute.
Copy settings to all tracks: The settings made in this Sound panorama module (sound
field offset, level drop characteristics, output volume sum constant, center, pan-law/width,
LFE level and settings, channel settings such as level changes or mute) are copied to all
other tracks once.