X

MIXER 161
Note: If a certain effect is already available, a repeat drag and drop of the same effect onto
the same track performs a reset of the effect to the values of used effect, and does not
copy it; the original values will be overwritten.
If all you want to do is move shift effects between the channels in the mixer instead of
copying them, simply keep the Shift button pressed while dragging & dropping.
Channels
Each track in the VIP is fed through a specific mixer channel. The sound settings of the
respective mixer channel are applied to the objects on the track.
Each channel strip provides the following settings options. Each individual section can be
opened and closed by clicking on the corresponding arrow symbol.
In (Input): In this field you determine the recording mode for the incoming signal:
 If you select "1+2 - Stereo in", the channel input will be switched to stereo and the
signal will be picked up on two channels.
 If you select "1 - Mono in", the channel input will be switched to mono and the signal
will only be picked up on one channel.
 If you select "Mono mix in", the channel input will be switched to mono and the signal
will be picked up on two channels and then mixed down to one.
 "Mono effect processing" enables you to switch the processing for the complete
channel from input to panorama fader to mono. This results in all object effects and track
effects being calculated before the panorama fader in mono. This function saved CPU
resources, given that it is supported by every plug-in. Opening "Mono effect
processing" switches the input to mono automatically. This function corresponds with
the mono switch in the track editor. This option is not available for buses because they
always calculate in stereo.