Manualshelf

X

ManualsBrandsMagix Xara ManualsApplicationsSamplitude Pro
151152153154155156157158159160
Table Of Contents
160 MIXER
Left clicking on value displays: Clicking on the area below the faders or on the left button
corners decreases the values. If the mouse is held down, the value is automatically
reduced until the key is again released or the end of the scale has been reached. (Shortcut:
Page down)
Clicking on the area above the faders or on the right button corners increases the values. If
the mouse button is held, the value is automatically increased until the key is again released
or the end of the scale has been reached. (Shortcut: Page up)
The level faders can be adjusted very precisely. If you click on these, whilst keeping the
left mouse button pressed and moving the mouse pointer left or right from the fader you
can fine tune the settings by moving the mouse on a vertical plane. The steps of the
settings become smaller as the mouse pointer is moved further away from the selected
fader.
The step size of the fader movement also becomes smaller if you hold down the "Shift" key
while moving a fader.
Knobs can be set in two different ways. After clicking on a knob you can move the mouse
around the knob or move the mouse up and down like with faders. This makes it possible
to reduce the step size value by holding down the shift key. The way in which the knobs
are controlled can be set in the "System Options" dialog (shortcut: "Y") under "Keyboard,
menu & mouse -> Mouse".
New AUX bus in mixer: A newly added AUX bus is always displayed in the arranger at
the bottom and in the mixer to the right with the highest channel.
Drag & drop in mixer: You can rearrange individual channel strips in the track number box
or name box via drag & drop. The mouse pointer turns into a hand. The overall settings of a
channel can be transferred to another channel via dragging & dropping the "FX" button.
The EQ settings can be transferred by dragging & dropping the "EQ" button.
The plug-in slots offer drag & drop functionality to copy effects to a different track or
between tracks and the master. The effects sequence for VST and DX plug-ins can be
changed within the track via drag & drop.