X

156 MANAGER
VSTi manager
The VSTi manager facilitates easy display, insertion, and deletion of MAGIX, VST, and
ReWire instruments in the current project. Right clicking the selected instrument opens the
plug-in dialog for the selected VSTi. If the plus sign beside the instruments display is
clicked, the outputs to the assigned tracks will be shown. By right clicking "Output to
track", a track may be selected which should only be fed the individual output of each. The
assigned output then appears in the target track's plug-in slot.
The general instrument outputs are routed in the VSTi manager via "Routing setup".
Specify how the outputs should be routed in the dialog that appears. Either route all
outputs to the current track or create new mono or stereo tracks for each output. Pressing
the "Del" key removes a selected instrument completely from the project. If only individual
output signals were selected, routing to a track is canceled by pressing the "Del" key.
Detailed information about instrument routing settings and about managing single outputs
is provided in the chapter "Software/VST instruments -> "Routing instruments (view page
318)".
Routing manager
The routing manager provides a clear overview of the matrix of inputs and outputs and
AUX connections of all tracks.
You can assign several tracks to the same inputs and outputs by selecting the desired I/O
for the first track and then assign the same I/O by pressing "Shift" + clicking on the last
track. Routing may be arranged vertically or diagonally.
In the output section, all tracks are displayed as potential submix busses behind the
playback devices; a track may be quickly converted into a submix bus by clicking the
corresponding matrix field.