Manualshelf

X

ManualsBrandsMagix Xara ManualsApplicationsSamplitude Pro
111112113114115116117118119120
Table Of Contents
OBJECT EDITOR 119
You can make the automation curves of the selected parameter visible in objects with the
"View" option.
In both of the lower fields you can select the desired automation parameters.
Activate the Automation drawing mode button and draw the object automation curve in
the corresponding object.
Position/Fades
Use this dialog to set object-related time positions (start, length, end) and fade parameter
for the selected object. In the entry fields "Timestamp" and "Step size" the measurement
units can be changed by simply clicking. The following units are available: samples,
milliseconds, hours/mins/secs, SMPTE (24, 25, 29.97 non drop, 29,97 drop, 30),
SMPTE/milliseconds, CD-MSF, feet and frames 16 mm (40fpf) and feet and frames 35 mm
(16fpf), noise reduction (meter).
Fade In/Fade Out
Fade in and fade out may be edited via this dialog.
Using the faders you can adjust the precise settings of the curve shape of the fade.
If you wish to produce the original fade, click on the arrow button and select the "Reset"
option.The same context menu also features linear presets of the curve shapes, "Exp"
(exponential), "Log" (logarithmic), "Cos" (Cosine) and "Sine". Here you can load separately
saved additional curve shapes. Double click the fader to switch the fade between "Linear"
and the last setting.