X

118 OBJECT EDITOR
Balance + stereo enhancer: The pan fader sets the stereo balance. The mid position
corresponds to a level of 0dB on both channels. When panorama is moved to the left, the
level of the right channel is reduced and vice versa.
The stereo button sets the base width of the left attack = 0% = mono via mid = 100% =
stereo to right attack = 200% = Enhan. (extreme base widening).
-4.5 dB Panorama+Stereo enhancer: The panorama fader controls the panorama
position so that when the levels of both channels are set to the middle, the channels are
reduced by -4.5 dB. In the outer settings one of the channels is faded out, the other is
raised from -4.5 dB to 0 dB via the control range. This compensates for any perceived
drop in volume in the mid position. Use this mode to place mono objects in the stereo
panorama.
2-channel panorama: In this mode, the two faders turn into two panorama faders for both
channels, just like a mixer with mono channels.
2-channel volume: This mode controls the level of the two object stereo tracks
separately.
Reset: This button resets the controller and Panorama mode.
Note: For three-times more powerful frequency-selective base width, use the multiband
stereo enhancer as an effect insert in the plug-in section.
Vol
Vol: The volume is controlled using this fader.
Double clicking on the fader sets it to 0 dB.
Norm.: The Norm. button normalizes the maximum level of the object to 0 dB
Automation
You can change object automation settings here.