2013

480
www.magix.com
the calibration line, and the numerically displayed tone pitch directly and can be
corrected accordingly.
Set marker 1: While recording you have the option of selecting a marker at the current
position of the playback marker (position line), in order to, for example, mark an
incorrect passage for correction later.
Recording: Click this button to start the actual recording process. Please note that
with active external synchronization as a Slave, the recording does not start
immediately, but rather at the start of each master.
Stop: Ends a running recording process. Should the computer be overloaded, for
example, as a result of swapping or disk access, the recording can be canceled by
pressing the right mouse button.
OK: Closes the recording window.
Varipitch/practice mode
Samplitude Music Studio 2013 supports any tempo changes during playback - even in
virtual multi-track projects. Right-click on the scrub control of the transport control.
Active: Activates the Varispeed mode.
Note: Once the Varispeed mode has been activated, you can close the dialog,
control occurs via the scrub control of the transport control.
Practice mode: If the practice mode is activated the pitch remains independent of the
playback speed. It is especially useful for pieces used for practice (e.g. an
accompaniment with guitar) that must be played slower because the player might
otherwise feel overstrained.
Vertical controller: The playback speed can be changed manually from -200% to +
200%.
Pitch: The speed factor can be specified precisely, for example, 0.5 for half speed.
Internal rate: Here you can specify a sample rate for the Varispeed calculation. If, for
example, a wave project with 48 kHz is to be played on a sound card that only
supports 44.1 kHz, enter 44100 as playback rate (left in the dialog) and 48000 as
internal rate. What follows is a real-time resample during playback - a strong feature
for all those, who have to convert between DAT (48 Khz) and CD (44.1 Khz) a lot.
BPM: Here you can specify an original and a target speed in BPM. Samplitude Music
Studio 2013 calculates the Varispeed factor from the ration to play a 120 bpm sample
in real-time with 135 bpm, for example.