2013

General settings 455
Hardware controller – "Internal" mode
The internal modes are used to adjust to different hardware controllers that operate
differently. Depending on the mode, the controller display is addressed differently and
Samplitude Music Studio 2013 interprets the controller messages correspondingly.
Hint: If you are using a controller which is different than the one listed here, then you
should select one from the list that is similar to yours in concept and design.
Internal modes description:
Mackie Multitrack
Track
Press first time: Track mode
Press second time: Active control mode
• Each activated mixer element (recognizable by the red marking) is controlled by
the first fader
PAN
• Pan mode (like track mode, except for the display)
EQ
Press first time: EQ Phat Channel Bandwise mode
• Gain, frequency, and quality accessible via the knobs
• Use the bank switch keys to access the other bands
Note: The bank switch functions have to be learned, which is usually the case
Press second time: EQ Phat Channel Typewise mode
• Gain, frequency, and quality accessible via the knobs (differently grouped than in
Bandwise mode)
• Using the bank switch keys, each of the other EQ functions can be accessed
AUX
Press first time: AUX track mode
• AUX 1 to 6 of the active track using the knobs