2013

322
www.magix.com
L&R wave > 2 mono
L& R wave projects can be split into two independent mono projects using this
function. This way you can break the fixed connection of the samples to one another
and edit them individually. If you wish to edit them together again, then select the "2
mono -> L&R wave" function.
LR wave > 1 mono
The current L&R wave project is converted into a mono mode. If it was a stereo
project before, then both channels will be mixed. The previous samples are first added
with 100% of their image and then divided by two to prevent overmodulation
(distortion). This is equivalent to reducing the volume by 6 dB.
1 mono > LR wave
The original mono wave project is duplicated and converted into a single L&R wave
project with the same sample in both channels.
2 mono -> LR wave
Here you can connect two mono wave projects to one L&R wave project. You can
then perform common operations and apply them to all samples.
After applying the command you will be prompted to activate the second mono wave
project that you want to connect to the active mono wave project. To do this, click on
the title bar of the corresponding window. Please note that only mono projects can be
linked to mono wave projects of the same bit and sample rate. The lengths of both
projects are adapted to each other.
Save in format
Use this function to convert wave projects between the various Samplitude Music
Studio 2013 formats for wave projects.
This can be useful if you want to convert RAM wave projects to HD wave projects, or
L&R wave projects (2 connected mono samples) into stereo wave projects.