15.0

Surround panorama module
In the "Surround Panorama" module the panning of a track or an object is set and edited on the
Surround bus.
Open the dialog

Right click on the Surround pan display of the relevant channel line in the mixer (this is only
possible if the twin-channel Surround mode is already active), or

Right click on the button or regulator in the relevant track in the VIP, or

Open the track menu of the VIP in the track information with a mouse right click and select "Pan
/ Surround editor", or

Select the required track in the VIP and select "Track -> Surround panorama module"
In the title line of the Surround panorama module the track is stated that it is currently being edited.
Example: "Surround panorama module: Track 4"
Display elements
In the panorama display the loudspeaker channels of the Surround setup are shown as blue dots.
Activating the options underneath the panorama display allows the following information to be displayed
in addition:
Name
The loudspeakers are designated with defined abbreviations: "L" (left), "C" (center), "R" (right), "Ls" (left
Surround), and "Rs" (right Surround).
Volume
A level indicator appears next to each loudspeaker and shows the value of the level share that the sound
source is transmitting on this Surround bus. For the stereo modes the total of the level of both sources is
always shown. If "Shift" is held down and the mouse is clicked on a source, only the value for this source
will be shown briefly.
Sound field
Page 567