15.0

Activation:
Assignment Track
Active Control Mode
Activation:
2 x Assignment Track
Function:
Changes the value of the selected element in the mixer with the 1st
fader.
AUX mode
Activation: Assignment AUX
Function: Controls all AUX sends in the selected channel.
EQ mode
Activation:
EQ assignment
Function:
Controls the EQ of the selected track using VPots.
Output
Deactivate:
If your PC does not have a motor fader, you can use this option to deactivate the transmission of
controller data.
Normal send: The MIDI
controller data is received and processed. Program data (e.g. fade changes in the mixer) are sent to the
controller.
Send echo:
The MIDI controller data is received and processed and forwarded straight back to the controller.
Controllers need this for their displays (lamps, LEDs). Program data (e.g. fade changes in the mixer) are
sent to the controller. If your controller has difficulties with this (e.g. .Logic Control), activate "Normal
send".
Send echo (without fader touch):
The MIDI controller data is received, processed and returned to the controller. However, the fader
values are not sent back while it is moved (activated fader touch). Only the last value is released to
prevent increased data volumes. Program data (e.g. fade changes in the mixer) are sent to the controller.
If your controller has difficulties with this (e.g. Logic Control), activate "Normal send".
Adjusting the hardware controller/creating your own set
Most devices available on the market understand protocols such as Mackie Control or HUI. If your
device is not included in the list simply select the nearest compatible device.
If you can't find your device in the list or want to change the default settings, you should proceed as
follows:
Before adapting an existing template to your controller you should save it under a new name using the "
Save as..."
option.
Now go to the "Adapt controller" tab. The following dialog will appear:
Page 1068