2011

68 Functions in detail
www.magix.com
Note: If restoration did not work, a corresponding notice will appear. Try
restoring to an older restoration point by starting the wizard again and
selecting an older date with a restoration time point.
Caution! If the PC no longer starts, system restore will not be able to help.
You have two options:
A) Press the F8 key while the PC boots and select "Last known functional
configuration".
or:
B)Please insert the Windows installation CD/DVD and start the PC again,
starting system repair.
Set system restore time point manually (XP)
If you are planning large-scale program installations or deinstallations, or you
want to install new hardware, it is recommended to set a restore time point
manually. If case of error messages, you can restore you system, and you PC
will run as stably as it did before.
To do this, proceed as follows:
1. Close all programs before starting system restoration assistant.
2. Open MAGIX PC Check & Tuning 2011, switch into the "PC performance &
Internet" and click on "System restore".
or:
Go to Start > Programs > Accessories > System programs > System restore.
The system restore assistant will be opened.
3. At the right in the assistant, select the task "Set restoration time point" and
confirm your selection with "Continue".
4. Enter a description of the restoration time point, so that you can readily
recognize it in case you have to conduct a system restore. (Date and time will
be added automatically.)
5. With one click on "Create", a restoration point will be created.
Note: After a restore point has been created, it may not be changed.