2011

46 Functions in detail
www.magix.com
If the system, for example, is installed on C, and you would like the swapfile to
no longer be managed on the C drive, proceed as follows:
Step 2: Under "Drives", select the C drive.
Step 3: To the right, under "Settings for drive" activate > "No swapfile".
No swapfile will be administered on C as a result.
Step 4: Under "Drives", select the drive where you would like to manage the
swapfile in the future.
Step 5: To the right, under "Settings for drive", activate "Size will be managed
by the system".
Step 6: Confirm changes by clicking "Apply settings".
The changes will be implemented after computer reboot.
Update drivers
Old or instable drivers may reduce your computer's performance and stability,
and sometimes lead to serious problems and crashes. Using this function, you
may look for new, stable drivers for your PC.
1. In MAGIX PC Check & Tuning 2011, select "Update drivers" in the "Increase
performance" area.
Tip: If you have very important files on your PC, you should create a backup of
these files before driver installation (Memory & files > Burn file backup (view
page 53) or Create a partition backup (view page 61)). There always remains a
risk that your PC will not function correctly with the new drivers. With a file
backup, you will have protected yourself.
2. Click "Start driver update".
MAGIX PC Check & Tuning 2011 checks the drivers for the chip set, sound
and graphics card.
3. Select "Show tested drivers" or "Show all drivers".
Because of the very high number of drivers available, MAGIX checks a large
portion of important drivers in order to be able to offer them as checked and
(relatively) secure. (There always remains a risk since your system has its
specific characteristics and might not "take" well to these drivers.) If you know
your way around drivers somewhat, you may also view unchecked drivers and
install these if necessary.