2011

Program functions at a glance 33
www.magix.com
• Right-clicking a service opens a context menu that allows you to start or end a
service. You can also adjust the startup mode.
System information
All important information regarding the built-in processor and bios at a glance.
• For example, you can see if the processor is overloaded. Compare the
"Current frequency rate" and the "Maximum frequency rate".
• In case you purchase a new processor, then you can see which socket on the
main board supports it.
Display PC load
The current load of the processor, the RAM, and the virtual RAM (swapfile) is
displayed here.
• If the RAM is constantly overloaded, this is an indication of performance
problems. It's possible that too many processes are active. Check this via
"Display processes".
Hard drive status
View important information about your drives and make changes in order to
optimize them.
• Select the drive, whose properties should be analyzed. The results will appear
in the display field below.
Garbage data: Like in PC Check, the program indicates whether there is
garbage data on your computer. It can be deleted by pressing "Clean".
Used disk space: What percent of the partition is free? If you would like to
(save and) delete data, you can open the data manager and clean the hard
disk.
Fragment: Here you can see how far along the data fragmentation process is.
If the light turns red, you should defragment the data on the hard drive.
Hint: MAGIX PC Check & Tuning 2011 uses data from the garbage data, used
disk space and fragmentation sections to suggest solutions for optimizing your
computer.
Temperature: The current hard disk temperature is displayed. The value should
be between 15° and 60° C.