2011

Program functions at a glance 15
www.magix.com
Program functions at a glance
This chapter will provide you with an overview of the functions available in
MAGIX PC Check & Tuning 2011 and where to find them. For comprehensive
functions, you will find detailed descriptions under "Functions in detail" (view
page 36).
PC Check
Optimize your PC with just a few clicks - fully automatically! After the check is
complete, all of the problems on the PC are displayed so that you may select
which optimizations should be carried out.
Click this button to start the check process for your PC
and to search for possible problems.
In the intermediate dialog that appears, you can see which
areas are being checked and whether any problems have
been identified.
When the scan is finished, the program window will list all results. If a problem
is found, a solution will be suggested next to it. Just one click is enough to
solve the problem.
Even faster: Click here if you want to solve all problems in
one process.
Hint: In most cases, this automatic problem solving
feature is sufficient for normal PC operation. User-defined
adjustments are possible in the areas "Increase
performance" and "Free up memory".
Status: After the check has been completed, the status displays if any
problems have been found. If the status is red, a problem has been found. If
no problems have been discovered, then the status will be green. If the PC has
not been tested yet or tested quite some time ago, then the status will be
yellow. If you have deactivated a test area in settings, the status will appear
gray.
The large status icon above the check list indicates the PC's overall status.
Status report: All of the areas that are checked are listed in descending order,
and their current status is shown with a short description of the problem. The