2013

Fills 215
Show three different black-to-white graduated color fills and the corresponding profile dialogs.
The center, default, is a linear black-to-white transition.
FILL HANDLE: Indicates if the start or end handle is selected. This field is blank for flat
fills.
RESOLUTION (bitmap and fractal fills only)-shows the resolution of the bitmap (as long
as you don't have a fill handle selected). You can type in a new resolution to change
the size of the bitmap. Low resolutions show the individual pixels of the bitmap. You
rarely need a resolution greater than 150 DPI, even for typeset output.
FILL HANDLE COLOR (except bitmap fills): Indicates the color applied to the selected fill
handle.
Changing the colors in a fill
To change a color in a fill:
• Drag & drop the color from the
COLOR LINE onto a fill handle (you do not have to
select the handle first.)
• Or, drag & drop the color onto the object. Each fill has an imaginary center line
halfway along the fill arrow. Dropping the color on the start handle side changes
the start handle color, and the end handle side changes the end handle.
• Or, if one of the end handles is selected (it's shown highlighted) just click on a
color. You can press "Tab" to select the other fill handle, and click the color
required for the other end