MX

Audio effects 217
www.magix.com
Chorus/Flanger
This plug-in
offers a simple way to make signals sound more interesting,
"spacier", thicker, etc. by modulating or delaying the pitch. The classical
domain of application is for guitars, Hammond organs, electric pianos, or
synths.
Chorus and flanger are two closely related effects, which is why we have
included them in a single plug-in. They normally differentiate in terms of delay
time, type of modulation, and degree of internal feedback.
Chorus flanger Parameters
 Mode:
- Mono chor
us: In this mode, the signal is fed through a delay unit and the
pitch is modulated. Original and delay copy are mixed into a monophonic
output signal.
- Stereo chorus: Compared to mono chorus, two copies of the original are
created, modulated against each other, and then fed accordingly to the set mix
ratio to the left and right output channel.
- Mono flanger & stereo flanger: Similar to the other modes. In this case, lower
delay periods and a slightly changed modulation are processed.
 Rate: This specifies the speed of the modulation. Lower rates provide slight
hovering effects, and high speeds produce a wobbling, typically distorted
"underwater" sound.
 Depth: This parameter specifies the depth of the modulation, i.e. the
maximum deviation of the modulation and the resulting pitch bending.
 Feedback: This parameter defines the portion of the delay that is sent back to
the input. Feedback causes the effects of modulation to be more drastic and
cutting.