MX

184 Audio effects
www.magix.com
Plus, in "HQ" mode, you can also
influence the dampening of highs as well
as the reverberation time of the bass
section.
When interacting with the high band, realistic simulations are possible, e.g. wall
surfaces. For instance, the wooden panels on the walls always reflect bass less
than concrete walls (also due to possible gaps), which may also resonate and
absorb the force of long-wave bass frequencies. The same also applies to the
furnishings of a room. Furniture, shelves, etc. are traps for bass.
Parameters of the HQ room/reverb models: Generally identical to those of
regular rooms/halls.
Exception: "ER absoptn" and "ER:tail" are not available (see explanation
above).
Also available are:
 Low damp: Dampening level of the bass range.
 Low freq: Start frequency of bass dampening.
MIDI cc setup:
The MIDI CC setup is a relatively simple routing matrix, whereby 8
of the available freely configurable MIDI controllers can be used to
control 8 internal parameters.
Every "Controller" field corresponds with a "Destination" field. Next, select a
MIDI controller directly from one of the lists or use the learn function.
If you activate one of the buttons to learn it, any following external controller
movements will be used to get the MIDI CC number. This enables one source
destination pair to be learned after the other.
If all parameters have been set, save the setup by pressing the
"Save setup" button. If you leave the MIDI CC view before doing
this, the previous settings will be restored.