MX

168 Live Performer
www.magix.com
Play Live Pads
Loops can be played bac
k by clicking on the corresponding Live Pads using
the computer or MIDI keyboard.
Keyboard shortcuts MIDI keyboard
Table A (left)
1..8 (using letter keys) F3 - C4
(Note number 65-72)
Table B (right)
qwertzui
C#4 - G#4
(Note number 73-80)
The MIDI driver can be selected via Program settings > Audio > MIDI input.
As soon as a Live Pad is selected, playback begins.
During playback the corresponding object will appear, and then disappear
again when the Pad is released (during a recording it will remain visible).
Synch Mode
By default, loops are played in Sync Mode, as if they were all started at the
arrangement start and switched with the pads to "audible"(Mute Automation).
This means that all loops always play in synch. Use this mode to create a basic
structure for your arrangement.
If the sync mode is turned off, loops will always be played back from the start,
as soon as they "pop up". Use this mode if you would like to add soli or effect
sounds or take apart beats to make break beats.
Record Live Pads.
By pressing the "Write" button you activate the recording of Live Pads.
During recording objects will be created in the arrangement if the
corresponding Live Pad is activated.
The recording takes place in overdub mode, and once created objects will not
be overwritten.
Here recording quantization is set. This means, that the start of an
object can be inserted in the arrangement according to the selected
bear grid during recording.