MX

Live Performer 165
www.magix.com
Your current arrangement will be erased, but the Live Performer ranges will be
applied to the new arrangement. This means that you can continue using the
Live Performer unchanged, or you can close it and further edit the finished
arrangement.
Load and save Live Pe
rformer ranges
With the load and save buttons next to the Sequencer you can
save and later load recorded or programmed Live Performer
sequences.
A user scenario: Assumed, that you have various performer ranges in one
arrangement and created a sequence. Before putting the piece together by
creating a new arrangement with the "Transform sequence into arrangement"
button, first save the raw material – the arrangement and the sequence.
If you would like to change a certain sample or transition later in your "put
together" song, you don't have to do it on each spot the sample is used.
Simply load your arrangement, change the respective places, load the
sequence and create your song anew. In this fashion you can quickly create
variations on a piece.
Live Performer recording
Use this button to start the Live Performer recording.
This will record all range switches in your time line made through the Live
Performer. As opposed to programmed sequences, ranges can be played
back only partially, the recording corresponding fully to your performance.
The precise length of such "partial" ranges can not be changed later in the
sequencer. You can remove them from the sequencer, but you cannot enter
them and can only create them with a Live Performer recording.
If, for instance, the button for playing the sequence is activated when the Live
Performer is active, the Live Performer will automatically switch to Sequencer
Mode and the recording will be stopped.