MX

Synthesizer objects 149
www.magix.com
"1 > 2-4" auto draw: If more than 1 beat is activated as the loop length, the
"Auto draw" mode ensures that the drum note set in the first beat is set
automatically for the following beats. This makes it very simple to produce a
continuous beat from a loop length of 4 beats. Notes set in the rear beats are
not affected by auto draw.
How to program a drum pattern:
 Select the pattern length with the fader.
 Select “Event” mode.
 If you edit during playback, turn off “Follow”. Select the beat with the “Edit”
buttons.
 Use “Select” to choose an instrument to edit.
 Use the “Clear bar” button to delete all steps in the
selected instrument.
 Turn on the appropriate step buttons, and use the
“Velocity” controller to adjust the beat velocity.
 Repeat the procedure with the other instruments
Snapshots
In addition, you can automate programming of the editable sound parameter of
a drum sound via so-called "snapshots". You can thereby save the sound
parameters of a drum instrument on the step buttons of the sequencers.
Automating the drum instrument with snapshots.:
 Set the edit mode to “Snap”.
 If you edit during playback, turn off “Follow”. Select the beat with the “Edit”
buttons.
 Select an instrument and edit the sound. You can control the sound of an
instrument even when playback has stopped by using the loudspeaker button.