MX

Synthesizer objects 131
www.magix.com
Reset: Sets all automation values for the selected parameter. 0.
Mode switcher: Switches the section between velocity control (view page
130) and automation switched. This happens automatically during
selection of parameters.
Random: The random parameter adds random variations to the set
automation. This helps make your beats sound more natural because each
programmed hit will sound slightly different. The level of the random
parameter is also influenced by the amount controller (see below), i.e. if the
amount is at "0", then the randomness will have no effect.
Amount: The amount parameter regulates the complete influence of the
automation values and of the random factor on the selected parameter. An
amount of "0" does not have any effect at all on the automation; maximum
level has the greatest effect. The effects of the amount controller on the
automation values is made visible by a slightly lighter line in the value
columns.
Automation values: The selected parameters can be drawn in as a column
with the mouse. Automation values can also be drawn between the set
notes; the sound of the drum instrument changes during playback.
Automation values are added to the original value of the parameters.
Editing velocities and automation values
Hold down "
Shift" and select any number of columns for velocity or automation
with the mouse.
The "Copy" button copies the selection to the clipboard. If you select this or
that track in another editor, then you can paste the notes there now from the
clipboard. If the target selection is larger than the contents of the clipboard,
then it will be inserted again. This lets you quickly add a short section
throughout the complete length of the pattern.
The three handles allow the velocity or automation values to be edited
together.