MX

112 MIDI Objects
www.magix.com
Quantization settings
The quantization settings can be found in the menu "MIDI functions ->
Extended quantization" in the MIDI editor. The dialog with the settings is not
"modal", i.e. you can open it as required and test certain passages with
different settings.
The selected quantization settings may be visualized in the top of the dialog.
The blue lines indicate the target positions for the quantized notes, i.e. the
snap points. The gray area around this show the quantization window i.e. the
target positions that are affected by the quantization.
Q-grid/length: The quantization grid and length at which target points within
the beat on which the note start points or lengths move (see above).
Q threshold/ Q window: This parameter may be used to slightly vary
quantization by excluding notes from quantization that are very close to the
next quantization value. "Q window" refers to the interval to the left and right of
a grid point; events will be quantized within this range. Quantization does not
take place outside of this window. This means that events with distance less
than the "threshold" or more then the "window" from the grid point will not be
quantized. The affected target range will be indicated in gray in the dialog
graphic.