2.0

13. Let’s assume we want to lower the volume of a section of the Object in the middle of the mix. One
way to do this (with MAGIX music editor 2 , there is always more than one way!) is by using the
Volume Curves. To activate the Volume Curves, click the VOL
button in the Track Properties section at the start of the track. The button will turn yellow and a yellow
Volume Curve will appear across the top of the Object.
14.
In the middle of the Object, create 4 Volume Handles by double clicking 4 times on the Volume Curve
(each double click slightly to the side of the previous)
15.
Volume Curve Handles are moved by clicking and dragging with the mouse. Select the second handle
from the left and drag it down to -15db (watch the ToolTip!), then select the third handle and drag it
down to -11db. Note that the waveform adjusts automatically to reflect the new gain changes.
Note : By selecting a Range which includes the Volume handles and starting playback, you can easily
adjust the handles in real time while listening to the changes. Selecting Loop Mode playback by clicking
the LOOP button on the Transport Control, Play Loop on the Play Parameter dialog or clicking the Play
Loop toolbar button will loop the playback.
Page 13