1.0

Settings 45
1. Active devices - Only active devices (and their active Inputs/Outputs) can
be used by Deckadance, i.e show in the INPUT / OUTPUT ROUTING
options. This is the step that is required to use a USB microphone with
your sound card. To activate a device click the button in front of the
device name, the blue button & arrow will light to indicate the device is
active. You must also ensure that the device's Inputs (In:) and Outputs
(Out:) are also activated. Click on any [+] squares in front of the device to
expand the list of Inputs and Outputs and click on the activate buttons.
NOTE: activating a device at the highest level does not necessarily mean
it's inputs and outputs are activated. For example, in the screenshot above
the Plantronics Headset Output is not activated and so won't be available
in Deckadance.
2. Latency compensation In/Out - sliders. Leave these at the default
settings. The ASIO4ALL driver reports to Deckadance the latency it adds to
the audio stream, and this is taken into account by the program where
appropriate. However, if you have measured the input/output latency of
your sound card using a loop-back cable, and know what you are doing,
then set the 'Latency compensation' sliders according to you measured
results.
3. Use hardware Buffer - Can reduce Buffer underruns (audio clicks, pops or
glitches). Whether or not it helps will depend on the design of your
soundcard's design and drivers.
4. Always resample 44.1 kHz <> 48 kHz - This option fixes a no sound
issue on SigmaTel C-Major Audio devices. If everything else seems to be
correct on your sound card settings and you are not hearing anything you
can give this option a try.
5. Force WDM Driver to 16-Bit - This option fixes a no sound issue on
SoundMax Digital Audio devices. If everything else seems to be correct
on your sound card settings and you are not hearing anything you can give
this option a try.
6. When you are done, close the ASIO4ALL options with the [X] window
control in the top-right corner.